![]() |
上海申思特自动化设备有限公司
主营产品: 美国E E传感器,美国E E减压阀,意大利ATOS阿托斯油缸,丹麦GRAS麦克风,丹麦GRAS人工头, ASCO电磁阀,IFM易福门传感器 |

联系电话
![]() |
上海申思特自动化设备有限公司
主营产品: 美国E E传感器,美国E E减压阀,意大利ATOS阿托斯油缸,丹麦GRAS麦克风,丹麦GRAS人工头, ASCO电磁阀,IFM易福门传感器 |
联系电话
2018-12-12 阅读(1198)
提 供 商 | 上海申思特自动化设备有限公司 | 资料大小 | 1.7MB |
---|---|---|---|
资料图片 | 下载次数 | 65次 | |
资料类型 | JPG 图片 | 浏览次数 | 1198次 |
GRAS预极化自由场麦克风46AE北京销售中心
GRAS麦克风 GRAS北京销售中心 GRAS* GRAS一级经销商
有种惦记叫……你到家没 ? 注意安全。
有种心疼叫……别熬夜,睡觉吧。
有种牵挂叫……多吃饭,注意身体。
有种真心叫……好的,我等你 。
有种付出叫……我愿意,不会后悔 。
有种感情叫……只要你开心,我陪你 。
有种温暖叫……别怕,还有我呢。
有种真爱叫……记住,我一直都在 。
有种想念就是 ……发照片,想看看你 。
有种在乎叫……别喝酒,注意身体!
分享页面
GRAS 40AE 1/2“预极化自由场麦克风
频率范围:3.15 Hz至20 kHz
Dyn范围:15 dB(A)至148 dB
灵敏度:50 mV / Pa
具有恒定电流功率的麦克风(CCP)
恒流电源(CCP)麦克风套件使用高质量的同轴电缆。有些套装包含3米长的电缆,其他则有电缆作为附件。应该注意的是,较长的电缆会影响较高的频率和动态范围。
所有GRAS麦克风套件均作为一个单元交付,并进行相应校准。这些套件随校准图表一起提供,包括整套的灵敏度值和频率响应曲线。因此,灵敏度值可以直接用于系统设置。除CCP变体外,GRAS麦克风套件还提供7针LEMO输入。
为了频繁验证测量链,需要声源。GRAS为此提供了一系列活塞式电话和声音校准器。根据用途(现场或实验室)和内部质量控制要求,我们建议至少每隔一年重新校准一次。请联系您的GRAS合作伙伴,获取工厂和认可的校准选项。
测量麦克风套装
测量麦克风套件已经组合在一起,因此可以满足用户的典型测量需求。独立于您的测量系统和应用程序,您应该能够找到适合您需求的装置。麦克风套件可以直接连接到所有专业测量系统,如图所示,它们可用于CCP和7针LEMO输入。
如果您的测量平台支持符合IEEE1451.4(TEDS)的智能传感器,您只需插入麦克风即可识别自己的特定属性,类型和校准数据。多渠道用户特别欣赏的功能。
CCP设备使用高质量的同轴电缆,而LEMO设备使用特殊的柔软型多芯屏蔽电缆。如果要使用延长电缆,则应考虑对较高频率和动态范围的可能影响。
所有麦克风套件均作为一个单元交付,并进行相应校准。这些套件随校准图表一起提供,包括整套的灵敏度值和频率响应曲线。因此,灵敏度值可以直接用于系统设置。
为了频繁验证测量链,将需要声源。GRAS为此提供114dB声音校准器。根据用途和内部质量控制要求,我们建议至少每隔一年重新校准一次。为了更准确的验证,我们建议使用活塞式电话进行校准。GRAS提供114dB和134dB活塞式电话。此外,我们建议根据极其可靠的参考来校准声源。GRAS提供校准服务,并建议每两年进行一次校准。
选择麦克风套装或从麦克风指南获取指导。
测量麦克风盒
GRAS测量麦克风有多种类型,涵盖各种频率范围,动态范围和适合不同的应用场合。
要选择适合您特定测量需求的麦克风,您的考虑因素很可能概括为:
? 预极化与外部偏光
?自由场,压力或随机发生
?动态范围和频率范围
有关选择正确麦克风的详细信息,请参阅我们的麦克风指南
技术
介绍
GRAS 40AE是根据IEC 61094-4要求制造的高精度驻极体电容式麦克风。用于麦克风的驻极体技术是在20世纪60年代初引入的,并且多年来一直在不断改进。在GRAS,我们开发并完善了自己的技术。这保证了我们的预极化麦克风在日常使用场景中与我们传统的外部极化版本一样稳定和坚固。
40AE的设计基于原始参考?“压力麦克风,但针对自由场测量进行了优化,灵敏度提高了12 dB。结果是标称灵敏度为50 mV / Pa,麦克风外壳略长,动态范围自然降低。
40AE是GRAS40AD? “Ext。的自由场补充。偏光压力麦克风。
40AE经过单独的工厂校准,并提供校准图表,说明其特定的开路灵敏度,压力和校正的自由场频率响应。
典型应用和使用
40AE的特性和坚固的设计使其成为适用于野外工作和实验室测量的自由场,高灵敏度麦克风的自然选择。
高灵敏度和高可靠性使40AE成为具有CCP选项的声级计/分析仪的选测量麦克风,因此可实现IEC 61672 1级测量。
兼容性
40AE需要一个标准化的?“或?”CCP前置放大器和一个支持该技术的输入模块,带有BNC,SMB或Microdot连接器。
系统验证
对于每日验证和检查您的测量设置,我们建议使用GRAS 42AG等校准器。
为了进行适当的灵敏度校准,我们建议使用GRAS 42AP智能活塞式电话等活塞式电话。
校准
出厂时,所有GRAS麦克风均已在可控实验室环境中使用可追溯校准设备进行校准。根据使用情况,测量环境和内部质量控制程序,我们建议每年至少重新校准一次麦克风。
我们提供两种校准作为可选的售后服务:GRAS可追溯校准和GRAS认可校准。
GRAS可追踪校准是由受过训练的人员根据既定程序和标准在受控条件下执行的可追溯校准。这与所有GRAS麦克风作为我们质量保证*的一部分的严格校准相同。
GRAS认可校准由GRAS认可校准实验室执行,该实验室已通过丹麦认证基金DANAK的ISO 17025认证。
如果您想要一个带有认可校准的新麦克风套件而不是默认的出厂校准,请在订购时。
在gras / calib了解更多信息。
质量和保修
所有GRAS麦克风均采用材料制成,确保终身稳定性和坚固性。麦克风全部由经过验证的洁净室环境组装,由熟练的专业操作员组成,并在该领域拥有多年的专业知识。
麦克风振膜,机身和改进的保护网格由不锈钢制成,这使得麦克风可以抵抗物理损坏,以及腐蚀性空气或气体造成的腐蚀。
这与加强的镀金麦克风端子相结合,确保了高度可靠的连接,使GRAS能够对有缺陷的材料和工艺提供5年保修。
服务
如果您不小心损坏了GRAS麦克风上的振膜,我们可以 - 在大多数情况下 - 以非常合理的成本和短的周转时间进行更换。这不仅可以保护您的投资,还可以使您的质量保证部门满意,因为您不必担心新的序列号等。
Technology
Introduction
GRAS 40AE is a high-precision electret condenser microphone made according to IEC 61094-4 requirements. The electret technology for microphones was introduced in the beginning of the 1960’s and has been continuously improved over the years. At GRAS, we have developed and refined our own techniques. This guarantees that our prepolarized microphones are as stable and robust as our traditional, externally polarized versions in daily use scenarios.
The 40AE’s design is based on the original reference ?” pressure microphone, but optimized for free-field measurements with a 12 dB increase of the sensitivity. The result is a nominal sensitivity of 50 mV/Pa, slightly longer microphone housing, and a natural reduced dynamic range.
40AE is the perfect free-field complement to the GRAS 40AD ?” Ext. Polarized Pressure Microphone.
40AE is individually factory-calibrated and delivered with a calibration chart stating its specific open-circuit sensitivity, pressure, and corrected free-field frequency responses.
Typical applications and use
The properties and robust design make 40AE the natural choice for an all-round free-field, high sensitive microphone suitable for both field-work and laboratory measurements.
The high sensitivity and reliability has made 40AE the preferred measurement microphone for sound level meters/analyzers with CCP-option and, as such, enables IEC 61672 Class 1 measurements.
Compatibility
The 40AE requires a standardized ?” or ?” CCP preamplifier and an input module that supports this technology with a BNC, SMB, or Microdot connector.
System verification
For daily verification and check of your measurement setup, we recommend using a calibrator like GRAS 42AG.
For proper sensitivity calibration, we recommend using a pistonphone like GRAS 42AP Intelligent Pistonphone.
Calibration
When leaving the factory, all GRAS microphones have been calibrated in a controlled laboratory environment using traceable calibration equipment. Depending on the use, measurement environment and internal quality control programs we recommend that the microphone is recalibrated at least once a year.
We offer two kinds of calibration as an optional after-sales service: GRAS Traceable Calibration and GRAS Accredited Calibration.
GRAS Traceable Calibration is a traceable calibration performed by trained personnel under controlled conditions according to established procedures and standards. This is identical to the rigorous calibration that all GRAS microphones are subjected to as an integral part of our quality assurance.
GRAS Accredited Calibration is performed by the GRAS Accredited Calibration Laboratory that has been accredited in accordance with ISO 17025 by DANAK, the Danish Accreditation Fund.
If you want a new microphone set delivered with an accredited calibration in stead of the default factory calibration, specify this when ordering.
Learn more at gras/calib.
Quality and warranty
All GRAS microphones are made of high-quality materials that will ensure life-long stability and robustness. The microphones are all assembled in verified clean-room environments by skilled and dedicated operators with many years of expertise in this field.
The microphone diaphragm, body, and improved protection grid are made of high-grade stainless steel, which makes the microphone resistant to physical damage, as well as corrosion caused by aggressive air or gasses.
This, combined with the reinforced gold-plated microphone terminal which guarantees a highly reliable connection, enables GRAS to offer 5 years warranty against defective materials and workmanship.
Service
If you accidentally damage the diaphragm on a GRAS microphone, we can — in most cases — replace it at a very reasonable cost and with a short turn-around time. This not only protects your investment, but also pleases your quality assurance department because you don’t have to worry about new serial numbers, etc.
订购信息
GRAS 46AE 1/2“CCP压力标准麦克风套件。这是”标准“后通风型。
GRAS 46AE-FV 1/2“CCP压力标准麦克风套件,正面通风。与46AE相同,但带有前通风口。
GRAS AA0035 3米BNC - BNC电缆
GRAS AA0039-CL 定制长度BNC - BNC电缆
GRAS AL0008 1/2“麦克风支架,POM
GRAS AL0012 1/2“麦克风支架,不锈钢
GRAS AL0005 旋转头
GRAS AL0006
GRAS RA0020 1/2“Nosecone
GRAS AM0069 挡风玻璃适用于1/2“麦克风
GRAS RA0131 1/2''防雨帽
GRAS 12AL 具有A加权滤波器的1通道CCP功率模块
GRAS 12AQ 2通道通用电源模块,带信号调理和PC接口
GRAS 42AG 多功能声音校准器,1级
GRAS 42AP 智能活塞,0级
GRAS CA0029麦克风套件的可追踪校准
GRAS CA2301麦克风套件的认可校准
Gras 46AE
Gras 46AC
Gras 46AP
Gras 46AR
Gras 46AF
Gras 46BF
Gras 46AG
Gras 46DP
Gras 46AO
Gras 46AQ
Gras 46AM
Gras 46BD
Gras 46DD
Gras 46AN
Gras 46EN
Gras 46EU
Gras 46AU
Gras 46BP
Gras 46BH
Gras 40SC
Gras 46SA
Gras 26AB
Gras 26AN
Gras 46AR
Gras 26AC
Gras 26HG
Gras 26AS
Gras 26CK
Gras 26CB
Gras 26CG
Gras 26CC
Gras 26CS
Gras 41AC
Gras 40HF
Gras 40HH
Gras AL0030
Gras AA0079
Gras 46BL
Gras 46BD
Gras 46BE
Gras OP0040
Gras OP0041
Gras OP0030
Gras OP0031
Gras OP0032
Gras OP0050
Gras OP0051
Gras OP0070
Gras 44AA
Gras 44AB
Gras OP0045
Gras OP0046
Gras 43AH
Gras 43AI
Gras AA0032
Gras AA0033
Gras AA0034
Gras AA0035
Gras AA0070
Gras AA0073-CL
Gras 12AL
Gras 12AX
Gras 42AG
Gras 42AP